EGP-800 變頻自動補償上下雙軸式千葉輪機(機械手臂專用)
EGP-800 變頻自動補償上下雙軸式千葉輪機(機械手臂專用)詳細介紹
機台外觀尺寸: 1200x600x1700mm
伺服滑台規格:(A)滑台行程200mm (B)台達400W伺服 馬達&伺服控制器 安全增防爆型
馬達規格:5HP,電源三相220V/380V,50/60Hz
安川變頻器規格:3.7KW (5HP) 三相380V
千葉輪機耗材規格:內孔25mm,最大外徑不得超過直徑 600mm 可同時使用兩種不同材質之研磨材,雙軸各自位置&速度 自動補償控制 可使用研磨材:千葉輪、麻輪、不織布輪…
重量:580Kg
Appearance size of the machine: 1200x600x1700mm
Servo slide specification: (A) slide stroke 200mm (B)Delta 400W servo motor & servo controller
Safety increase explosion-proof motor specifications: 5HP, power supply three-phase 220V/380V, 50/60Hz
Yaskawa inverter specifications: 3.7KW (5HP) three-phase 380V
Thousand impeller machine consumables specifications: inner hole 25mm, maximum outer diameter must not exceed 600mm diameter. Two different materials can be used at the same time, and the position and speed of the two axes are automatically compensated and controlled. Abrasive materials can be used: Thousand impellers, hemp wheels, non-woven wheels... Weight: 580Kg